24/7 breakdown support across the Riverina0427 997 730[email protected]

Home / Services / Industrial electrician Coleambally

AREA · Coleambally

Industrial electrician and farm automation in Coleambally

Pump boards, grain storage controls and shed power for Coleambally's irrigation farms, about 45 minutes south of our Griffith workshop.

Upgraded automation control panel with new power supplies and relaysCCTV camera pole overlooking farm sheds and a grain silo

AREA · Coleambally · What we do

A town built for irrigation farming.

Coleambally is one of the youngest towns in NSW. It opened in 1968 to serve the Coleambally Irrigation Area, and farming is still what it is there for. Rice has long been the main crop, grown alongside wheat and other grains, cotton, sheep and cattle. Most farms have their own pumps, grain storage, workshops and machinery sheds.

AMC looks after the electrical and control side of that equipment. We design and build pump boards and shed switchboards in our Griffith workshop, automate grain storage aeration, program PLCs and operator screens, and connect sheds, silos and pumps with farm networks so you can check them from your phone. Coleambally is about 65 km from Griffith.

What we do

  • Irrigation and drainage pump boards
  • VSDs and soft starters
  • Grain storage aeration control
  • Conveyor controls
  • Shed and workshop switchboards
  • Farm Wi-Fi, IoT sensors and CCTV
  • PLC and HMI programming and upgrades
  • 24/7 breakdown support

Standards, platforms & tools

PLC & HMIVSDsAeration controlFarm networksCCTVAS/NZS 3000

Typical Coleambally work

What suits Coleambally farms.

Farm jobs here tend to come in the gaps between crops. These are the common ones.

01

Farm pumps

Boards for supply, recirculation and drainage pumps, with level or pressure control. See irrigation pump control.

02

Grain storage

Aeration fans that run on temperature and humidity readings to keep stored grain in condition, with run records.

03

Handling gear

Controls and safe isolation for conveyors, with guarding and e-stops where people work.

04

Shed power

New and upgraded switchboards when a shed or workshop outgrows the supply.

05

Eyes on the farm

Cameras on sheds, fuel and gates, and Wi-Fi in the workshop. See farm networking and CCTV.

06

Ageing controls

Old relay panels and unsupported PLCs replaced with documented control. See our PLC upgrade guide.

Getting to Coleambally

Down the Kidman Way, across the river.

Coleambally is about 65 km south of Griffith, through Darlington Point, and about 45 minutes by road. That makes planned jobs and breakdown call-outs both practical.

We work around the farming calendar. Boards and panels are built and tested in our workshop while you are busy, then installed between sowing and harvest or after the crop is off. You get drawings and test records, and the program where there is a PLC.

  • Site visit and scope
  • Upfront price
  • Workshop build and test
  • Installation between crops
  • Commissioning and handover
  • Breakdown support afterwards

Proof

See it on the job.

We have not published a Coleambally case study. Similar work elsewhere in the region includes farm-wide Wi-Fi and CCTV with solar-powered camera poles, an automated river pump and legacy control system upgrades.

Where we work

Griffith-based. Riverina and Australia-wide.

We cover Coleambally and the surrounding irrigation farms, Darlington Point and the rest of the Riverina.

GriffithLeetonYendaHanwoodYoogaliNarranderaDarlington PointColeamballyHayHillstonWagga WaggaMildura

FAQs

Common questions

How far is AMC from Coleambally?

Our workshop is in Griffith, about 65 km or roughly 45 minutes' drive from Coleambally via Darlington Point.

Can you automate aeration on our grain storage?

Yes. We set up aeration control that runs fans on live temperature and humidity readings, with alarms and run records you can check remotely.

Can you fit remote monitoring to an existing farm pump?

Usually. If the existing board is sound we can add monitoring, remote start and stop and fault alerts. If it is unsafe or worn out we will recommend replacing it.

Can you get Wi-Fi and cameras out to our sheds and silos?

Yes. Point-to-point wireless links carry the network from the house to sheds, silos and pumps, with solar power where there are no mains. Our farm Wi-Fi and solar CCTV guide explains how it works.

Do you do breakdown call-outs in Coleambally at harvest?

Yes. We provide 24/7 breakdown support across the Riverina, including Coleambally. Call 0427 997 730.

Next step

Got a plant, machine or board that needs sorting?

Send us the scope, drawings or a few photos. An engineer reads every request and comes back within one business day with next steps and a clear, upfront price.

Project engineer or OEM? Send a P&ID, equipment list or scope for a budget price.

Call nowEmailGet a quote