Home / Guides & tools
Guides & tools
Electrical and automation guides and tools
Plain-English guides, a checklist and online calculators on machine safety, hazardous areas, switchboards, PLC upgrades, robotics and pumps.
These guides are written by the AMC Electrical & Automation engineering team in Griffith, NSW. Pick a topic below.
Machine safety
- AS 4024 explained: machine safety in Australia
What the standard covers, how it ties to your WHS duties, and what a compliant guarding and safety-system project looks like. - Safety categories and Performance Levels
What Category 3, PLd and PLr actually mean, how the required Performance Level is chosen, and which standards apply in Australia. - Light curtain safety distance
How to calculate the minimum distance: the ISO 13855 formula, the constants behind it, how to measure stopping time and three worked examples. - Machine risk assessment checklist
What to check, and in what order, when you assess a machine: before it goes into service, after a change, or when nobody can find the last assessment.
Hazardous areas
- EEHA explained: hazardous area electrical work
Zones, AS/NZS 60079, Ex equipment and the verification dossier, and what a compliant hazardous area project looks like. - Hazardous area classification and zone drawings
How gas and dust zones are worked out, what a zone drawing should show, and what goes in the verification dossier for an Australian site.
Switchboards and power
- Switchboard compliance: AS/NZS 61439 in plain English
What the standard requires, what a compliant board actually means, and what to ask for when you buy a switchboard, MCC or control panel. - Modifying an existing switchboard under AS/NZS 61439
What changes when you add to, extend or alter a switchboard or MCC, who takes on the manufacturer's responsibilities, and what has to be verified and recorded. - VSD vs DOL vs soft starter for industrial motors
How direct-on-line, star-delta, soft starters and variable speed drives compare on conveyors, fans, process pumps, mixers and compressors, and a simple checklist for picking one.
PLC, controls and upgrades
- Upgrading an old PLC
How to tell when your PLC is on borrowed time, what your upgrade options are, and how a well-planned cutover keeps the plant running. - SLC 500 and PLC-5 migration guide
What Rockwell says about SLC 500 and PLC-5 today, the ways to get off them, what can be reused, and how to stage the changeover so the plant keeps running.
Robotics
- Robotic palletising: is it worth it?
When automating end-of-line palletising makes sense, what's involved, and what to think about before you buy.
Irrigation, pumps and farms
- DOL, soft starter or VSD for an irrigation pump
What each starter does to the motor, the pipeline and the power supply, and a plain way to pick the right one for your pump. - Farm Wi-Fi and solar CCTV
How to get a reliable connection from the house to the sheds, pumps and gates, and run cameras where there is no power.
Planning a project
- Electrical and automation scope for a new process plant
What the package includes, the deliverables in the order they are produced, the gaps that cause cost blow-outs, and what an integrator needs from you to price it properly. - How to write a functional design specification (FDS)
What a functional design specification is, who writes and approves it, what goes in it, and how it drives the code, the HMI and the testing.
Calculators and tools
- Downtime cost calculator
Work out what unplanned downtime costs your plant per stoppage, per month and per year. - Robotic palletising payback calculator
Estimate the payback on a robotic palletiser from your own labour, shifts and system cost. - Electrical load list tool
List your motors and loads and get an early estimate of connected load, running load and maximum demand in kVA and amps.
The guides are general information. For advice on your own site, talk to an engineer.
Next step
Got a plant, machine or board that needs sorting?
Send us the scope, drawings or a few photos. An engineer reads every request and comes back within one business day with next steps and a clear, upfront price.
Project engineer or OEM? Send a P&ID, equipment list or scope for a budget price.
