24/7 breakdown support across the Riverina0427 997 730[email protected]

Home / Services / Industrial electrician Darlington Point

AREA · Darlington Point

Industrial electrician and automation in Darlington Point

River pump stations, processing plant and farm electrical on the Murrumbidgee, about half an hour from our Griffith workshop.

PLC control board with safety relays and terminal wiringRiver pump site after automation

AREA · Darlington Point · What we do

The closest river town to our workshop.

Darlington Point sits on the Murrumbidgee River, a few kilometres up the Kidman Way from the Sturt Highway. Farms in the district pump from the river and grow crops such as rice, cotton, wheat and almonds. The area is also home to poultry farming and processing and to beverage manufacturing.

It is about 35 km from our Griffith workshop, so we can treat Darlington Point much like home. AMC designs and builds pump control boards and switchboards, programs PLCs, HMIs and SCADA, makes machines safe to AS 4024, and provides installation, maintenance and 24/7 breakdown support for farms and processing sites.

What we do

  • River pump station control and automation
  • VSDs, soft starters and motor protection
  • Switchboards, MCCs and control panels
  • PLC, HMI and SCADA programming
  • Processing and packing line electrical
  • Machine safety risk assessments to AS 4024
  • Shed controls, alarms and remote monitoring
  • 24/7 breakdown support

Standards, platforms & tools

PLC & HMIVSDsSCADAAS 4024AS/NZS 61439AS/NZS 3000

Typical Darlington Point work

What suits Darlington Point sites.

River, sheds and processing plant. Each has its own demands.

01

River pump stations

Pump boards that cope with a changing river level, with remote start, stop and alarms. See irrigation pump control.

02

Processing plant

Electrical installation, controls and drives for food and beverage plant. See food and beverage automation.

03

Machine safety

Risk assessments to AS 4024, guarding, e-stops and safety systems. Start with our risk assessment checklist.

04

Sheds and workshops

Switchboards, power and lighting for sheds and workshops, tested and documented.

05

Power

Main switchboards and distribution boards for new sheds, pumps and plant, built in our workshop.

06

Motor starting

Not sure how a big pump motor should start? Read our guide to DOL, soft starters and VSDs.

Getting to Darlington Point

Half an hour down the road.

Darlington Point is about 35 km south of Griffith on the Kidman Way, around half an hour by road. Site visits are easy to arrange, and breakdown call-outs are as practical as they are in Griffith.

For new boards and control systems we still build and test in the workshop first, so the changeover on your site is short. Being close also suits regular maintenance: we can set up planned checks so problems are found before they stop a pump or a line.

  • Site visit and scope
  • Design, drawings and an upfront price
  • Workshop build and full test
  • Installation around your operation
  • Commissioning and training
  • Planned maintenance and breakdown cover

Proof

See it on the job.

Our published work in the region includes an automated river pump, a CIP and filler control system for a juice plant, a pallet wrapper safety system to AS 4024 and a 1000 A distribution board for a beverage plant.

Where we work

Griffith-based. Riverina and Australia-wide.

We cover Darlington Point, Waddi, Coleambally and the farms along the river, along with the rest of the Riverina.

GriffithLeetonYendaHanwoodYoogaliNarranderaDarlington PointColeamballyHayHillstonWagga WaggaMildura

FAQs

Common questions

How far is AMC from Darlington Point?

Our workshop is in Griffith, about 35 km or around half an hour's drive from Darlington Point along the Kidman Way.

Do you do breakdown call-outs in Darlington Point?

Yes. We provide 24/7 breakdown support across the Riverina, and Darlington Point is one of the closest towns to our base. Call 0427 997 730.

Can you automate a river pump on the Murrumbidgee?

Yes. We design and build the pump control board, install the site electrical and set up remote control and alarms. See irrigation pump control and our automated river pump project.

Do you work in food and beverage processing plants?

Yes. PLC and SCADA, CIP and filler controls, switchboards, machine safety and installation inside operating plants. See food and beverage automation.

Can you run a planned maintenance program for our site?

Yes. We set up preventative maintenance programs to catch problems before they stop production. Being about half an hour away makes regular visits simple.

Next step

Got a plant, machine or board that needs sorting?

Send us the scope, drawings or a few photos. An engineer reads every request and comes back within one business day with next steps and a clear, upfront price.

Project engineer or OEM? Send a P&ID, equipment list or scope for a budget price.

Call nowEmailGet a quote