24/7 breakdown support across the Riverina0427 997 730[email protected]

Home / Services / Industrial electrician Hay

AREA · Hay

Industrial electrician and automation for Hay

Pump automation, remote monitoring and control systems for the Hay plains, built and tested in Griffith so they work first time when they get there.

Solar-powered CCTV pole with a long-range wireless link on a rural propertyAMC engineer commissioning a river pump control board on site with a laptop

AREA · Hay · What we do

Long distances call for systems you can trust and check from anywhere.

Hay sits on the Murrumbidgee River where the Sturt, Cobb and Mid-Western highways meet. The plains around it are known for Merino wool, sheep and cattle, and irrigation has added rice, cotton, maize and vegetables such as lettuce, pumpkins and melons. Properties are large, pump sites are a long way apart and the nearest specialist is rarely close.

That is why the work we do for Hay is built around reliability and remote visibility. AMC designs and builds pump control boards, switchboards and control panels in our Griffith workshop, tests them before they leave, and sets up remote monitoring so you, and we, can see what a site is doing without the drive. Hay is about 155 km west of Griffith along the Sturt Highway.

What we do

  • River and channel pump automation
  • Remote monitoring, telemetry and alarms
  • Pump boards with VSDs or soft starters
  • Solar-powered monitoring and communications
  • Long-range farm networks and CCTV
  • Switchboards and control panels
  • PLC and HMI programming and upgrades
  • Planned maintenance and breakdown support

Standards, platforms & tools

Remote monitoringTelemetryVSDsSolarPLC & HMIAS/NZS 3000

Why distance matters

Designed for sites a long way from town.

When the nearest electrician is hours away, the design has to do more of the work.

01

Know before you drive

Run status, flow, pressure and faults on your phone, so a trip to the pump is for a reason.

02

Alarms that reach you

Low flow, dry-run and motor faults send an alert early, before a fault becomes a failure.

03

Tested before it travels

Boards are built and tested in the workshop with the program loaded. See switchboard manufacturing.

04

No mains, no problem

Solar power and long-range wireless links for pumps, gates and cameras. See our farm Wi-Fi and solar CCTV guide.

05

Remote support

With your approval we can connect to the control system and fault-find without a site visit.

06

Fewer, better trips

We plan site work in blocks and bring spares, so one trip gets the job finished.

How we work in Hay

Planned trips, with remote help in between.

Hay is about an hour and 40 minutes from our Griffith workshop, through Darlington Point. For project work we do as much as possible in the workshop, then install and commission in planned visits. Travel is priced upfront in the quote.

Breakdown support is available at any hour, and we will be straight with you about travel time. Where a site has remote access, we can often find the fault, or talk your own people through a fix, before anyone gets in a ute.

  • Scope by phone, photos or site visit
  • Design, drawings and an upfront price
  • Workshop build and full test
  • Installation in planned visits
  • Commissioning and remote access set-up
  • Remote and on-site support afterwards

Proof

See it on the job.

At Lake Cargelligo, elsewhere in western NSW, we replaced a manually run river pump with an automated system with remote control and up to 30% less water wasted. We have also delivered farm-wide connectivity and CCTV with solar-powered camera poles.

Where we work

Griffith-based. Riverina and Australia-wide.

We take on work in Hay, Maude, Booligal and along the Sturt Highway, as well as across the rest of the Riverina.

GriffithLeetonYendaHanwoodYoogaliNarranderaDarlington PointColeamballyHayHillstonWagga WaggaMildura

FAQs

Common questions

How far is AMC from Hay?

Our workshop is in Griffith, about 155 km or roughly an hour and 40 minutes' drive from Hay via Darlington Point and the Sturt Highway.

Will you travel to Hay for a single job?

Yes. Travel is priced upfront in the quote. Where we can, we group work into one visit and build and test in the workshop first to keep site time down.

Can I monitor a pump that is a long way from the house?

Yes. We set up remote monitoring and control so you can see run status and faults and start or stop pumps from your phone. See irrigation pump control.

What if there is no mains power or mobile coverage at the site?

Solar power can run monitoring and communications, and long-range wireless links can carry the signal back to the house or shed. Each site needs a survey first to check line of sight.

Can you fault-find a system in Hay without driving out?

Often, if the control system has remote access. With your approval we connect securely, look at the program and alarms, and work out whether a visit is needed and what to bring.

Next step

Got a plant, machine or board that needs sorting?

Send us the scope, drawings or a few photos. An engineer reads every request and comes back within one business day with next steps and a clear, upfront price.

Project engineer or OEM? Send a P&ID, equipment list or scope for a budget price.

Call nowEmailGet a quote