24/7 breakdown support across the Riverina0427 997 730[email protected]

Home / Services / Industrial electrician Hillston

AREA · Hillston

Industrial electrician and pump automation in Hillston

River and bore pump control, switchboards and shed automation for Hillston's irrigated farms, about 110 km up the Kidman Way from Griffith.

Automated river pump control board installed in a pump shedLarge orange main switchboard built in the AMC workshop

AREA · Hillston · What we do

Lachlan River and bore water, put to work properly.

Hillston sits on the Lachlan River, and the district's farms irrigate from the river and from underground water. That water supports cotton, citrus, vegetables and grain, alongside livestock, and the district has its own cotton ginning. Big pumps, long pipelines and seasonal packing and processing mean large electrical loads a long way from town.

AMC designs and builds the boards and control systems that run that equipment. From our workshop in Griffith we supply pump control boards with soft starters or VSDs, main switchboards, PLC control for packing and processing lines, machine safety to AS 4024 and remote monitoring so you can check a pump station from your phone.

What we do

  • Bore and river pump control boards
  • VSDs and soft starters for large pump motors
  • Multi-pump duty and standby sequencing
  • Remote monitoring and control
  • Main switchboards and MCCs
  • Packing and processing line controls
  • Machine guarding and risk assessments
  • 24/7 breakdown support

Standards, platforms & tools

VSDsSoft startersPLC & HMITelemetryAS/NZS 61439AS 4024

Typical Hillston work

What suits Hillston farms and sheds.

Most enquiries start with water. The rest follow from what the water grows.

01

Bore pumps

Submersible bore pumps have long motor cables and need the right starter and protection. Our starter guide explains the choices.

02

River pumps

Automated river pump stations with flow or pressure control and remote start and stop. See irrigation pump control.

03

Power supply

Switchboards sized for large motors, with metering so you can see what each pump costs to run.

04

Packing sheds

Conveyor and packing line controls for citrus and vegetables. See packing shed automation.

05

Seasonal plant

Controls, drives and safety systems for processing plant that has to run hard through a short season.

06

Old starters and boards

Worn-out starters and tired pump boards replaced or upgraded, with drawings so the next fault is quicker to find.

Getting to Hillston

Straight up the Kidman Way.

Hillston is about 110 km north of Griffith, roughly an hour and a quarter by road. That is close enough for planned work and for breakdowns, and we price travel upfront.

Boards are built and tested in our workshop before they go north, so installation on your site is quick. Before the season is the best time to upgrade a pump board or add a drive. If you are weighing up a VSD against a soft starter, we will explain the trade-offs in plain terms first.

  • Site visit and pump assessment
  • Starter, drive and board design
  • Workshop build and full test
  • Installation before the season
  • Commissioning and remote access set-up
  • Breakdown and seasonal support

Proof

See it on the job.

Further up the Lachlan at Lake Cargelligo, we replaced a manually run river pump with a fully automated system: AMC designed and built the pump control board, installed the site electrical and pipework controls and commissioned it with remote control, with up to 30% less water wasted.

Where we work

Griffith-based. Riverina and Australia-wide.

We cover Hillston, Merriwagga, Goolgowi and farms along the Lachlan, along with the rest of the Riverina.

GriffithLeetonYendaHanwoodYoogaliNarranderaDarlington PointColeamballyHayHillstonWagga WaggaMildura

FAQs

Common questions

How far is AMC from Hillston?

Our workshop is in Griffith, about 110 km or roughly an hour and a quarter's drive from Hillston along the Kidman Way.

Should a bore pump run on a soft starter or a VSD?

It depends on the bore, the pump and how you water. A VSD can hold pressure or flow as demand changes, but long cable runs down a bore usually need an output filter. Our guide to DOL, soft starters and VSDs covers it.

Have you automated a river pump near Hillston?

Our public example is at Lake Cargelligo, also on the Lachlan River. See the automated river pump project.

Can you supply a switchboard for a new pump station or shed?

Yes. We design and build switchboards and MCCs in our Griffith workshop to AS/NZS 61439 and install them on site. See switchboard manufacturing.

Do you do breakdown call-outs in Hillston during the season?

Yes. We provide 24/7 breakdown support across the Riverina, including Hillston. Call 0427 997 730.

Next step

Got a plant, machine or board that needs sorting?

Send us the scope, drawings or a few photos. An engineer reads every request and comes back within one business day with next steps and a clear, upfront price.

Project engineer or OEM? Send a P&ID, equipment list or scope for a budget price.

Call nowEmailGet a quote