24/7 breakdown support across the Riverina0427 997 730[email protected]

Home / Services / OEM control panels

FOR OEMS & IMPORTERS

Control panels and compliance for OEM machine builders and importers

Panels, PLC and HMI software, machine safety and the documents your customer will ask for, on imported or locally built machines.

Finished conveyor control panel built in the AMC Griffith workshopPLC control board with operator touchscreen built by AMC

FOR OEMS & IMPORTERS · What we do

Your machine. Our panel, software and compliance.

If you build machines, or bring them into Australia, the control panel and the paperwork are often what hold up a sale. The customer's electrician wants drawings. Their safety manager wants a risk assessment. The site wants the machine wired and tested to Australian standards before it is switched on.

AMC is the electrical and controls team behind the machine. We design and build the control panel in our Griffith workshop, write the PLC and HMI software, assess and fix the machine safety, and hand over a documentation pack. When you sell the next one, we build it again to the same design. We can also meet your machine at the end customer's site to connect, test and commission it.

What we do

  • Control panel design and build
  • PLC and HMI programming
  • Variable speed drives and motor control
  • Machine safety risk assessments to AS 4024
  • Safety circuits, guarding and light curtains
  • Review of imported machines against Australian standards
  • Rework or replacement of non-compliant panels
  • Repeat builds to a standard design
  • Documentation pack with every machine
  • Commissioning at the end customer's site

Standards, platforms & tools

AS/NZS 3000AS/NZS 61439AS 4024Allen-BradleySiemensOmronSchneider

Imported and locally built machines

What usually needs sorting.

A machine built for another market can be well made and still not suit Australian standards or supply. A locally built machine often lacks drawings and a safety file. These are the things we deal with most.

01

Supply and wiring

The machine's wiring and panel checked against AS/NZS 3000 and the site supply: voltage and frequency, protection, isolation and earthing.

02

The panel

Control panels designed, built and tested in our workshop to AS/NZS 61439, or an imported panel reworked where that is the better answer.

03

Machine safety

A risk assessment to AS 4024, then the guarding, interlocks, emergency stops and safety controller it calls for, tested and validated. See machine safety.

04

PLC and HMI

New software, or changes to what came with the machine: plain-English screens and alarms, and signals to the customer's line or SCADA.

05

Documents

Schematics, panel layout, parts list, program backups, risk assessment and test records, in English, ready for the customer's file.

06

The next machine

Once the design is proven we build it again as a standard: same drawings, same parts, same software, with options handled as variants.

How we work with OEMs

Design it once. Build it each time you sell one.

The first machine is where the engineering happens. We agree the panel design, the software and the safety system with you, build and test the panel in our Griffith workshop with the software loaded, and prove it on the machine. After that it is a repeat build to a controlled set of drawings and a parts list.

We are happy to sign a non-disclosure agreement before we see drawings or software, and we work to the PLC and drive brands you or your customer prefer. If you only need part of this, such as the panel or the safety assessment, that is fine too. Building a whole plant, not a single machine? See how we work with project teams.

  • Review of the machine, drawings and software
  • Risk assessment and a list of compliance gaps
  • Panel and safety system design
  • Workshop build and test with software loaded
  • Fit, test and validate on the machine
  • Documentation pack and repeat-build file
  • Commissioning at the end customer's site
  • Remote support after handover

Proof

See it on the job.

Related work includes a pallet wrapper safety system risk assessed, designed, integrated and validated to AS 4024, a robotic palletising cell with safety guarding, and a conveyor control panel with a PLC, safety relays and eight variable speed drives.

Where we work

Griffith-based. Riverina and Australia-wide.

Panels are built and tested in Griffith NSW and shipped Australia-wide. Our crew travels to the end customer's site for commissioning.

GriffithLeetonYendaHanwoodYoogaliNarranderaDarlington PointColeamballyHayHillstonWagga WaggaMildura

Documentation pack

The paperwork your customer will ask for.

Each machine leaves with a file the end customer's electrician, safety manager and maintenance team can use.

  • Electrical schematics and panel layout drawings
  • Parts list for the panel and safety devices
  • I/O list and a short functional description
  • PLC and HMI program backups
  • Machine risk assessment to AS 4024
  • Safety validation and electrical test records

To price a panel

What to send us.

Send what you have. Photos and a manual are enough to start a conversation.

  • What the machine does, with photos or a video
  • Existing electrical drawings and manuals
  • Motors, heaters and drives with their ratings
  • Sensors, valves and other inputs and outputs
  • The supply the machine was built for
  • Preferred PLC, HMI and drive brands
  • Where the machine is going and who installs it
  • How many you expect to build or import

FAQs

Common questions

Does a CE-marked machine comply in Australia?

Not automatically. A CE mark is the manufacturer's declaration against European requirements. In Australia the machine still has to be safe under work health and safety law, and its electrical installation has to meet AS/NZS 3000. A well-built European machine is often close, but it needs checking. This is general information, not legal advice.

Which Australian standards apply to a machine control panel?

The main ones are AS/NZS 3000 for the electrical installation, AS/NZS 61439 for switchgear and controlgear assemblies, and the AS 4024 series for safety of machinery. Machines in hazardous areas also come under AS/NZS 60079. We tell you which apply to your machine. See our AS/NZS 61439 guide.

Can you fix an imported panel instead of replacing it?

Often, yes. We review it first and list what needs to change. Sometimes a few changes are enough. Sometimes a new panel built here is the simpler answer and easier to support.

Can you build the same panel again when we sell another machine?

Yes. Once the first one is proven we keep the drawings, parts list and software as a standard design and build repeats to it, with options handled as variants.

Do you do the machine risk assessment as well?

Yes. We assess machines to AS 4024, design and install the safety system, then validate and document it. See our plain-English guide to AS 4024.

Which PLC and HMI brands can you use?

We work to your preference or your customer's site standard. Our team programs Rockwell / Allen-Bradley, Siemens, Omron and Schneider Modicon systems. See PLC and SCADA programming.

Will you sign an NDA?

Yes. We are happy to sign a non-disclosure agreement before we see your machine drawings or software.

Can you commission at our customer's site?

Yes. Our crew travels Australia-wide for installation and commissioning, and where the customer allows secure remote access we can support the machine afterwards without a site visit.

Next step

Building or importing a machine?

Send us photos, drawings or the manual, or call and talk it through with an engineer. If you want an NDA in place first, say so and we will sign it before you send anything.

Project engineer or OEM? Send a P&ID, equipment list or scope for a budget price.

Call nowEmailGet a quote