24/7 breakdown support across the Riverina0427 997 730[email protected]

Home / Services / Engineering partner

FOR PROJECT TEAMS

Your electrical and automation engineering team, without hiring one

For project engineers, plant developers, OEMs and consultancies with a plant, machine or process to deliver and no electrical and instrumentation team in-house.

AMC electrical schematic sheet showing 415 V distribution, motor circuits and title blockThe AMC team with a switchboard in the Griffith workshop

FOR PROJECT TEAMS · What we do

The electrical and automation extension of your design team.

You know the process, the mechanical design and the client. What you may not have is someone to turn a process description and an equipment list into a power supply, motor control centres, a control system and a commissioned plant. That is the part we do.

AMC works alongside project teams as their electrical and automation engineers. We join at concept stage with a scope and a budget price, carry the design through the load list, single line diagram, MCC design, schematics and functional description, build and test the boards and software in our Griffith workshop, then install and commission with our own crew anywhere in Australia. You deal with one team and one point of contact the whole way.

What we do

  • Scope and budget price for feasibility
  • Load list and maximum demand
  • Single line diagrams
  • MCC, switchboard and control panel design
  • Schematics, I/O lists and cable schedules
  • Functional descriptions and control philosophies
  • PLC, HMI and SCADA software
  • Network architecture and remote access
  • Machine safety risk assessments to AS 4024
  • Hazardous area design to AS/NZS 60079
  • Workshop build and factory testing
  • Installation and commissioning, Australia-wide

Standards, platforms & tools

Allen-BradleySiemensOmronSchneider ModiconCitect SCADAAS/NZS 3000AS/NZS 61439AS 4024AS/NZS 60079

How we work with a project team

Six stages. Commit to one at a time.

Each stage has its own scope, deliverables and price, so you can match your commitment to where the project is up to.

01

Concept and budget price

From a process description, P&ID or equipment list we build a first load list and scope, and give you a budget price to use in a feasibility study or funding case.

02

Detailed design

Load list, single line diagram, MCC and switchboard design, schematics, I/O list, functional description, network architecture and the safety risk assessment. See engineering design.

03

Build and factory test

Boards and panels are built in our Griffith workshop and tested with the PLC and HMI or SCADA software loaded, before anything goes to site.

04

Install and commission

Our own crew installs, terminates, tests and commissions on your site, anywhere in Australia. See how we deliver interstate.

05

Support and changes

Secure remote access for fault-finding and program changes, breakdown support, and drawings kept up to date as the plant changes.

06

Repeat plants

The design, software and documents from the first plant are reused, so the next plant starts from a proven base and needs less engineering.

Working inside your project

Set up to fit your team, not the other way round.

What usually matters to a project team: confidentiality, one person to talk to, no big commitment up front, and documents that match the rest of the project file.

  • NDA first. We are happy to sign a non-disclosure agreement before we see a drawing, a process description or an equipment list.
  • One point of contact. One AMC engineer leads your job from the budget price to commissioning and can join your design reviews.
  • One stage at a time. Each stage has its own scope and price. You approve a stage before we start it.
  • Your platform. We design to the PLC, drive and SCADA brands you or your client prefer.
  • Your formats. Where you ask, drawings and documents use your title block, numbering and tag conventions.
  • Your contract. We work for you directly, or as the electrical and controls subcontractor on your project.

What to send us for a budget price

Send what you have. It doesn't need to be finished.

A budget price does not need a finished design. A process description and an equipment list are enough to start, and each extra item on this list tightens the number. Where something is not decided yet, we state the assumption we made, so you can see what the price is built on.

Not sure of your total load yet? Our electrical load list tool gives a rough maximum demand from a motor list. Our new plant electrical scope guide sets out what the full package includes and where the cost surprises usually come from.

  • Process description or block flow diagram
  • P&ID or process flow diagram, even a draft
  • Equipment list with motor sizes in kW
  • Vendor packages that come with their own control panel
  • Site layout with rough distances
  • What is known about the power supply to the site
  • Any flammable liquids, gases or combustible dusts
  • How automated the plant should be, and who will run it
  • Preferred PLC, drive and SCADA brands, if any
  • Your key dates and the decision the price has to support

Proof

See it on the job.

Our project work includes an automated CIP system and filler control system for a juice plant, a 1000 A main distribution board for a beverage processing plant, a citrus packing conveyor control system, and power and control cabling for new process equipment inside an operating food plant. Client names are kept confidential.

Where we work

Griffith-based. Riverina and Australia-wide.

We engineer, build and test in Griffith NSW, and our crew travels for installation and commissioning Australia-wide.

GriffithLeetonYendaHanwoodYoogaliNarranderaDarlington PointColeamballyHayHillstonWagga WaggaMildura

FAQs

Common questions

Can you give a budget price before the design is done?

Yes. From a process description, P&ID or equipment list we prepare a scope and a budget price for a feasibility study or funding case. It is a budget figure with the assumptions written down, and it is firmed up once the front-end design is done. There is no charge for a budget price.

Will you sign an NDA before we send anything?

Yes. We are happy to sign a non-disclosure agreement before we see your drawings, process description or equipment list.

Do we have to commit to the whole project up front?

No. The work is staged: concept and budget price, detailed design, build and factory test, installation and commissioning, then support. Each stage has its own scope and price, and you approve a stage before we start it.

Can you do part of the package only?

Yes. Some project teams want the design package only, some want the control system only, and some want everything from the single line diagram to commissioning. We scope it to suit.

Which PLC and SCADA platforms do you work with?

We work to your preference. Our team programs Rockwell / Allen-Bradley, Siemens, Omron and Schneider Modicon PLCs, plus Citect SCADA, and is comfortable with bespoke and proprietary systems. See PLC and SCADA programming.

Can you work to our drawing and document standards?

Yes. Where you ask, we use your title block, drawing numbering, tag conventions and document templates, so our package sits cleanly in your project file.

Who builds the MCCs and control panels?

We do, in our own Griffith workshop. Switchgear assemblies are built to AS/NZS 61439 and tested before they ship. See switchboard and MCC manufacturing.

Do you install and commission outside NSW?

Yes. Boards and panels are built and tested in Griffith, then our crew travels for installation and commissioning. See Australia-wide projects.

We plan to build more than one plant. How does that work?

The first plant sets the standard: drawings, MCC design, software and functional description. For the next plant we reuse them and change only what the new site needs.

What is the first step?

Send us what you have through the contact page, or call 0427 997 730 and talk it through with an engineer. If you want an NDA in place first, say so and we will sort that out before you send anything.

Next step

Have a plant, machine or process to deliver?

Send us the process description, P&ID or equipment list, or call and talk it through with an engineer. If you want an NDA in place first, say so and we will sign it before you send anything.

Project engineer or OEM? Send a P&ID, equipment list or scope for a budget price.

Call nowEmailGet a quote