24/7 breakdown support across the Riverina0427 997 730[email protected]

Home / Industries / Winery electrical & automation

IND · Wineries

Winery electrical, automation and controls

A winery electrician and a controls engineer in the same team: refrigeration and tank control, CIP, bottling lines, switchboards and breakdown support through vintage.

Stainless process pipework and equipment after an AMC electrical installationPLC control board with operator touchscreen built by AMC

IND · Wineries · What we do

Vintage doesn't wait for a tripped drive.

A winery does most of a year's work in a few months. From the first loads over the weighbridge to the last ferment, crushers, presses, pumps, refrigeration and tank farm controls run hard, and a failure at the wrong moment can cost fruit and quality. The Riverina is the largest wine producing region in New South Wales, and AMC is based in the middle of it, in Griffith.

We are industrial electricians and automation engineers under one roof. We design and build switchboards and control panels in our own workshop, program PLCs, HMIs and SCADA, carry out machine safety and hazardous-area work, install inside operating plants and back it all with 24/7 breakdown support. Winery owners, winemakers and project engineers deal with one team, from the incoming supply to the end of the bottling line.

What we do

  • Tank temperature and refrigeration control
  • Crusher, press and transfer pump controls
  • CIP and site services controls
  • Bottling and packaging line integration
  • PLC, HMI and SCADA programming
  • Main switchboards, MCCs and control panels
  • Machine safety (AS 4024) and hazardous areas
  • Pre-vintage maintenance and 24/7 breakdowns

Standards, platforms & tools

Allen-BradleySiemensOmronSchneiderAS/NZS 3000AS/NZS 61439AS 4024AS/NZS 60079

Where we help in a winery

From the weighbridge to the warehouse.

Winery electrical work covers a lot of ground. These are the areas we work in most, and what usually needs attention in each.

01

Crush and press

Receival hoppers, crushers, destemmers, presses and must pumps, with drives, interlocks and controls that are simple to run in the middle of the night.

02

Tanks and refrigeration

Refrigeration is typically the biggest electricity user in a winery. We work on tank temperature control, refrigeration plant controls and the power that feeds them.

03

CIP and site services

Automated clean-in-place and site services controls with repeatable cycles, interlocks and records. See our CIP and filler project.

04

Bottling and packaging

Filler, labeller, packer and palletiser integration, line control and machine safety, so the line runs as one system.

05

Power and switchboards

Main switchboards, MCCs and distribution boards sized for vintage peak load, with room for the next expansion. See switchboards and MCCs.

06

Spirit and hazardous areas

Areas where spirit is stored or handled can be classified as hazardous areas. We design, install and inspect to AS/NZS 60079. See hazardous area electrical.

How a project runs

Planned around vintage, built in the off-season.

Winery projects run to the calendar. We scope and design after vintage, build and test panels and software in our Griffith workshop, and install and commission in time for the next crush. A breakdown during vintage is a different job, and we treat it that way: get the plant running safely first, then come back and fix the cause properly.

Most wineries have equipment from many suppliers and several decades. We document what is there, standardise where it makes sense, and replace obsolete PLCs and drives in stages so the cellar keeps working. At handover you get as-built drawings, the PLC and HMI programs, and the safety records an auditor or insurer will ask for.

  • Post-vintage review and scope
  • Electrical and control design with drawings
  • Workshop build and software testing
  • Installation around cellar operations
  • Commissioning before the next vintage
  • Vintage breakdown support and follow-up

Proof

See it on the job.

We keep client names confidential, so we describe our work by type. Recent beverage and food processing jobs include a fully automated CIP system and new filler control system for a juice plant, a 1000 A distribution board for a growing beverage processing plant, and process plant installation inside an operating food plant.

Where we work

Griffith-based. Riverina and Australia-wide.

Griffith is home, so wineries around Griffith, Yenda, Hanwood and Leeton are minutes away. We also deliver winery projects in other regions: boards and panels are built and tested in Griffith, and our team travels to install and commission.

GriffithLeetonYendaHanwoodYoogaliNarranderaDarlington PointColeamballyHayHillstonWagga WaggaMildura

FAQs

Common questions

Do you do breakdowns during vintage?

Yes. We provide 24/7 breakdown support across the Riverina. Call 0427 997 730. More on our industrial electrician and breakdowns page.

Can you take over controls that another contractor or equipment supplier installed?

Yes. Most wineries have a mix of equipment from different suppliers. We trace and document what is there, then fix, extend or replace the controls as needed, and hand you the drawings and programs.

Can you help reduce our winery's power bill?

Often. The Australian Wine Research Institute puts refrigeration at 50% to 70% of a typical winery's electricity use, so that is the first place to look. We install energy meters in your switchboards, show where the power goes and correct poor power factor. See energy monitoring and sub-metering.

Which PLC and SCADA platforms do you work with?

We program Allen-Bradley, Siemens, Omron and Schneider PLCs, HMIs and SCADA, and we upgrade older systems that are no longer supported. See PLC and SCADA programming.

Do you handle hazardous areas around spirit storage?

Yes. Areas where spirit is stored or handled may need to be classified as hazardous areas. We carry out EEHA design, installation and inspection to AS/NZS 60079. Our EEHA guide explains how it works.

Do you work with winery project teams and equipment suppliers?

Yes. We work for winery owners directly, and as the electrical and controls subcontractor to head contractors, process engineers and equipment suppliers. Our capability statement has our licences and insurance for your supplier file.

Next step

Got a plant, machine or board that needs sorting?

Send us the scope, drawings or a few photos. An engineer reads every request and comes back within one business day with next steps and a clear, upfront price.

Project engineer or OEM? Send a P&ID, equipment list or scope for a budget price.

Call nowEmailGet a quote